FOR SALE: 2014 Ninja 300 racebike

RT70

New Member
Buy my race bike!

Decked out 2014 Ninja 300 now up for sale. Bike is located in Vancouver.
  • Makes just under 39.5HP
  • Lots of weight reduction
  • Fully safety wired and race prepped

Bike was raced from new in 2015 and part of 2016 by the first owner, and by me in 2018/2019. Clean Canadian title. Thoroughly maintained. I have dyno sheets, maintenance records, and suspension spec sheets.

Build List:
  • Armour Bodies Race bodywork
  • Racing windshield
  • Woodcraft clipons
  • Woodcraft brake/clutch lever guards
  • Pazzo short folding levers
  • MotionPro Rev2 quick turn throttle
  • Woodcraft rearsets
  • Braided steel front brake line
  • EBC Pro-Lite XC floating front rotor
  • Arashi lightweight rear rotor
  • Vesrah RJL-ZZ high performance race pads
  • Pirelli Superbike SC-1 slicks
  • Spears front/rear wheel spacer kits
  • EK415R chain
  • 415 sprockets (currently 57/17)
  • Spears Shift Kit Steel Bearing
  • Spears heavy duty shift detent spring
  • EBC SRK race clutch kit (springs and friction plates)
  • K-Tech 20IDS forks
  • Penske fully adjustable shock with remote reservoir
  • SKF fork seals
  • Stompgrip tank grips
  • Woodcraft frame sliders
  • Woodcraft spools
  • R&G engine case covers
  • Spears lightweight no-drill sharkfin
  • Full Spectrum Pulse 2 lightweight (1lb) battery
  • Woodcraft key elimination harness (entire ignition column removed)
  • Kill switch and starter replacement
  • Driven lightweight keyless gas cap
  • Titanium brake front/rear rotor bolts
  • Titanium/Aluminum front fender bolts
  • Aluminum/Nylon mudguard and chainguard bolts
  • R&G lightweight exhaust bracket with rear brake res. Holder
  • Titanium exhaust mount bolt
  • Titanium/Aluminum shock reservoir mount bolts/nuts
  • Select aluminum engine cover bolts
  • Extensive weight reduction (took off another 12.75lbs for 2019)
Extras:
  • Extra OEM gas tank
  • Extra OEM front fairing stay
  • Extra Muzzy slip-on
  • Extra windshield
  • Service manual
  • OEM front/rear brake rotors
  • A bunch of spare OEM parts
New work done for 2019:
  • Basically went cover to cover through the service manual (short of splitting the crankcase), with help from Burnaby Kawasaki
  • Forks/shock rebuilt and tuned by SuspensionWerx
  • Front brake caliper freshly rebuilt
  • Front master cylinder freshly rebuilt
  • New steel braided front brake line
  • All cooling hoses replaced with new
  • New front/rear wheel bearings
  • New 415 chain
  • New spark plugs

Going for $6500 OBO
Give a shout if you have any questions

_RN10605-(ZF-4935-86121-1-003)-small.jpg IMG_20200114_210724-01-small.jpg IMG_20200114_210840-01-small.jpg IMG_20200114_210903-01-small.jpg IMG_20200114_210920-01-small.jpg IMG_20200114_210929-01-small.jpg IMG_20200114_211024-01-small.jpg IMG_20200114_211048-01-small.jpg IMG_20200114_211141-01-small.jpg IMG_20200114_211626-01-small.jpg
 
Top