Need 2003 SV Fuel Line for this weekend

jetfixer15

Active Member
Can you not use rubber automotive fuel line material with the same inner diameter available at auto stores and just cut it to length? I have replaced most of my fuel lines on many bikes that way. As long as there are no kinks in the line that interupt fuel flow it will be fine.
 

Arctic Donkey

Active Member
As this is a FI system I would worry that the pressure may cause leaks without the proper fittings.......but it is certainly worth a try.
 

Jason Henton

Active Member
If its high pressure I would use the proper stuff. If its low pressure, I have some of the formed stuff from a 1st gen as well as couple feet of extra bulk type stuff in my parts box.
 
Top