RamboRay
New Member
2005 YAMAHA R6 Race Bike
Hello,
I am selling my very low Km(5,232) R6 that I built over this winter. I spared no expense in building it into this creation I had envisioned. I put the best of the best racing parts into it to compete with the new generation of bikes. I was given the opportunity to ride a BMW S1000RR this season. Rather then leave this R6 parked all year, I am putting it up for sale.
A few key points to note here are. It makes 119 RWHP on 91 octane pump gas. Ohlins and Elka do not make a rear shocks for this model any longer. This rear shock is a custom built triple adjustable racing unit by Stadium Suspensions Quebec. It utilizes a standard Ohlins spring for inter changeability and a piggy back remote reservoir.
Front forks are from a 2010 R6 they were rebuilt with a K-Tech full racing SSRK cartridge kit by Jodie Christies crew chief John Sherrard of Accelerated Racing Technologies in Ontario. They were set up for a 180lbs expert rider at Castrol raceway. Making this bike very stable and balanced.
The bike has been equipped and tuned with the new PCV power commander. Brand new (label still on) Pirelli racing slicks were also just installed this May.
Its a perfect bike for the Novice to Intermediate racer. Though I am sure we a have a few experts in our club that can and would love to turn some very fast lap times on this nasty little super sport. It has been geared, setup and safety wired to for Castrol Raceway.
New Parts List Below:
2 Tire Warmers (120F/180R)
2 Bike Stands (Lower Tree Type Front)
Rear Shock - Stadium Suspensions Triple
Front Forks - K-Tech Full Race Kit
2010 R6 Front Forks
Rear Set Vortex V3
Power Commander 5 PCV
Tires - Pirelli SC1/ SC2 Race Set
Wheels Extra Set w/ Rotors & Tires
Tank Grip Pads
CNC Aluminum Clip-ons
Brake Pads EBC Front
Sprocket Aluminum-Vortex V3 54T geared for Castrol Raceway
Chain 520-VortexV3
Woodcraft Shark fin Guard
Woodcraft Clutch :ever Guard
NRC Side Engine Covers
GP Exhaust
Frame Sliders-Vortex V3
Clutch Lever Folding GP
Brake Lever Folding GP
SafetyWire Kurvy Girl Speed Clips
New Grips
New Battery
OEM Frame
Akrapovic Exhaust Can
OEM Rear Sets and other take off parts
$5000 OBO
E-mail: [email protected]
Hello,
I am selling my very low Km(5,232) R6 that I built over this winter. I spared no expense in building it into this creation I had envisioned. I put the best of the best racing parts into it to compete with the new generation of bikes. I was given the opportunity to ride a BMW S1000RR this season. Rather then leave this R6 parked all year, I am putting it up for sale.
A few key points to note here are. It makes 119 RWHP on 91 octane pump gas. Ohlins and Elka do not make a rear shocks for this model any longer. This rear shock is a custom built triple adjustable racing unit by Stadium Suspensions Quebec. It utilizes a standard Ohlins spring for inter changeability and a piggy back remote reservoir.
Front forks are from a 2010 R6 they were rebuilt with a K-Tech full racing SSRK cartridge kit by Jodie Christies crew chief John Sherrard of Accelerated Racing Technologies in Ontario. They were set up for a 180lbs expert rider at Castrol raceway. Making this bike very stable and balanced.
The bike has been equipped and tuned with the new PCV power commander. Brand new (label still on) Pirelli racing slicks were also just installed this May.
Its a perfect bike for the Novice to Intermediate racer. Though I am sure we a have a few experts in our club that can and would love to turn some very fast lap times on this nasty little super sport. It has been geared, setup and safety wired to for Castrol Raceway.
New Parts List Below:
2 Tire Warmers (120F/180R)
2 Bike Stands (Lower Tree Type Front)
Rear Shock - Stadium Suspensions Triple
Front Forks - K-Tech Full Race Kit
2010 R6 Front Forks
Rear Set Vortex V3
Power Commander 5 PCV
Tires - Pirelli SC1/ SC2 Race Set
Wheels Extra Set w/ Rotors & Tires
Tank Grip Pads
CNC Aluminum Clip-ons
Brake Pads EBC Front
Sprocket Aluminum-Vortex V3 54T geared for Castrol Raceway
Chain 520-VortexV3
Woodcraft Shark fin Guard
Woodcraft Clutch :ever Guard
NRC Side Engine Covers
GP Exhaust
Frame Sliders-Vortex V3
Clutch Lever Folding GP
Brake Lever Folding GP
SafetyWire Kurvy Girl Speed Clips
New Grips
New Battery
OEM Frame
Akrapovic Exhaust Can
OEM Rear Sets and other take off parts
$5000 OBO
E-mail: [email protected]
Attachments
Last edited:
