FS: Bazzaz Zfi TC Gsxr 600/750 08-15 zafm

W

Way2fast

New Member
Looking to sell my nearly new bazaaz Zfi tc. bought this in the winter, ran it 1 track day at chuckwalla and found a deal on a new bike so hoping to try to recover at least a part of the cost. comes with everything as it did new, minus the stickers and the box. o2 eliminator, quick shifter, wiring harness is in perfect shape.

I can bring it to the track and program with one of the bazaaz tunes from their website for your bike, takes a little over an hour (maybe as much as 2 taking your time) to install if you have tools.

asking 750$, paid just under 1000cdn, and its literally got maybe 3 hours on it



also have the zafm for autotuning. same as above the sensor has about 3 hours on it, 1 full track day. the sensor needs an M18 bung so your stock o2 bung will not work as it sits.

asking 250$


buy them both and ill take 100$ off -- 900$

I have 06/07 style headers with an m18 bung that fit 06-09 bikes and make the autotune a bolt on affair
 
gixxer60_0

gixxer60_0

Active Member
I was looking on the Bazaaz site and it says the 600 and 750 are different.

Z-Fi Fuel Controller is different
GSXR 750 -2006-16 part # F645
GSXR 600 -2006-07 part # F641
GSXR 600 -2008-16 part # F644

You might want to clarify which GSXR you have it for.
 
W

Way2fast

New Member
This came off an 09 600. The wiring harness and ecu are the same for the 600/750 (the f644 and f645 parts) the difference in the 06/07 600 model (f641) is the o2 sensor. The 06/07 600's don't run a factory o2 sensor, this kit has the plug for the factory o2 sensor.

The F644 and F645 are the same harness and ecu, the only difference is the preloaded map. I have the 750 map and the 600 map, and there are about a half dozen on the bazzaz site for each that you can download. I couldn't say for sure this would work on the 06/07 600's but with very few changes between those and and the newer ones it may, in sure a call to bazzaz would sort that out. So to clarify this will work on 08-16 600's and 06-16 750's. I would load the stock map for either needed. As mention as well, I could help with any install questions. I did this in a garage with minimal tools in about 2hrs start to finish, stated the bike and road chuckwalla.

Price is obo so if your interested drop me a line
 
Last edited:
You must log in or register to reply here.
Top