2005 R1 for sale track or street
Sorry to those who looked before. there was a typo. The bike is a 2005 not 2004, just noticed the error.
Reduced to $7000
Bike with clear title - NOT A SALVAGE BIKE
Bike needs nothing - its not abused - its built to run 190 hp at the rear tire on pump fuel and survive as long as a stock bike. So many acc. and parts to go with it its almost sick.
I was able to turn 59 second laps at the EMRA track my first time out to the track with this bike. Its smooth and strong.
leather suit, helmet and new rain tires also available for a very fair price
Will consider delivering to Edmonton in July on my way through.
will consider trade towards snowmobile -144" track preffered but open to looking at trades up or across for other units too
Pay cash take it for $7000
Serious quality bike with every part a guy could want
All factory parts in a box included
all spare parts new and used included
tire warmers, lap timer, transponder 2d data logger and stands included
Bike has been built from the ground up by Yamaha Canada not by some rookie
bike is street legal in Sask. and has been registered
Bike needs nothing to go race - easy to put on the street as a naked bike or spend a weekend putting the factory plastic back on for a full stock look
Frame glass bead blasted and endura coated Orange - Aluminum swing arm is '06 R1 - 25mm longer and is clear coat over raw aluminum - orange '05 swing arm included also
Spare rims with brand new never used Michelin tires for street use.
ARMOUR BODIES bodywork with dzus fasteners.
•PBR brand clip-on handlebars
RnG frame sliders
•VORTEX fuel cap
•BITECH rear-sets
•WOODCRAFT brand left and right engine covers
•2D Data logging basic set with software, manual and usb
•2D Data Wheel speed sensor
• RUSSEL Steel-braided brake lines front
•DP brake pads installed
VORTEX rear sprocket
•D.I.D. ERV 530 chain
•Superior Suspension Systems front suspension internals
•OHLINS TTX Rear shock
•OHLINS Steering Dampener
•STM slipper clutch w/new plates installed
•HINDLE custom built exhaust system
•PIRELLI Slicks
•KIT Y.E.C. wiring harness
•KIT Y.E.C. engine ECU computer
•KIT Y.E.C. radiator and hoses
•KIT Y.E.C. transmission
•KIT Y.E.C. intake and exhaust camshafts
•KIT Y.E.C. valves , springs and retainers
•KIT Y.E.C. head and base gaskets
•KIT Y.E.C. airbox modification kit
•KIT Y.E.C. Throttle bodies and fuel pressure regulator
If its an aftermarket part on the list then I also have the new never used stock part to go with it.
Bike never left the garage in 2010. Aprox 1500 km on the bike total. email me if you want pictures or see my kijiji add in Prince Albert, Sk. Ad ID 264615567
Bike has to go Im building a house and for the second year have no time to ride.
Sorry to those who looked before. there was a typo. The bike is a 2005 not 2004, just noticed the error.
Reduced to $7000
Bike with clear title - NOT A SALVAGE BIKE
Bike needs nothing - its not abused - its built to run 190 hp at the rear tire on pump fuel and survive as long as a stock bike. So many acc. and parts to go with it its almost sick.
I was able to turn 59 second laps at the EMRA track my first time out to the track with this bike. Its smooth and strong.
leather suit, helmet and new rain tires also available for a very fair price
Will consider delivering to Edmonton in July on my way through.
will consider trade towards snowmobile -144" track preffered but open to looking at trades up or across for other units too
Pay cash take it for $7000
Serious quality bike with every part a guy could want
All factory parts in a box included
all spare parts new and used included
tire warmers, lap timer, transponder 2d data logger and stands included
Bike has been built from the ground up by Yamaha Canada not by some rookie
bike is street legal in Sask. and has been registered
Bike needs nothing to go race - easy to put on the street as a naked bike or spend a weekend putting the factory plastic back on for a full stock look
Frame glass bead blasted and endura coated Orange - Aluminum swing arm is '06 R1 - 25mm longer and is clear coat over raw aluminum - orange '05 swing arm included also
Spare rims with brand new never used Michelin tires for street use.
ARMOUR BODIES bodywork with dzus fasteners.
•PBR brand clip-on handlebars
RnG frame sliders
•VORTEX fuel cap
•BITECH rear-sets
•WOODCRAFT brand left and right engine covers
•2D Data logging basic set with software, manual and usb
•2D Data Wheel speed sensor
• RUSSEL Steel-braided brake lines front
•DP brake pads installed
VORTEX rear sprocket
•D.I.D. ERV 530 chain
•Superior Suspension Systems front suspension internals
•OHLINS TTX Rear shock
•OHLINS Steering Dampener
•STM slipper clutch w/new plates installed
•HINDLE custom built exhaust system
•PIRELLI Slicks
•KIT Y.E.C. wiring harness
•KIT Y.E.C. engine ECU computer
•KIT Y.E.C. radiator and hoses
•KIT Y.E.C. transmission
•KIT Y.E.C. intake and exhaust camshafts
•KIT Y.E.C. valves , springs and retainers
•KIT Y.E.C. head and base gaskets
•KIT Y.E.C. airbox modification kit
•KIT Y.E.C. Throttle bodies and fuel pressure regulator
If its an aftermarket part on the list then I also have the new never used stock part to go with it.
Bike never left the garage in 2010. Aprox 1500 km on the bike total. email me if you want pictures or see my kijiji add in Prince Albert, Sk. Ad ID 264615567
Bike has to go Im building a house and for the second year have no time to ride.
Last edited: