tim_johnson
New Member
2006 Suzuki Canada Factory Superbike - $6000
(spare set of wheels with brake disks available for additional $600)
For more information e-mail me at [email protected] or call 403.615.0209
You won't find another machine in this good of condition with this many spares, ready to ride, for this low of a price! There are no problems with this bike - it is ready to ride NOW. Contact me for pictures or more info, and details are below. This is the bike that Brad Gavey dubbed "the Millenium Falcon". Funny but true - still the fastest ship in the galaxy!
Former Clint McBain factory Suzuki race bike, No street bodywork – track bike only.
180 HP Engine by Vass Performance – 7-9 hours track use since engine re-build, includes World Superbike cams, aluminum engine sidecovers.
Brand new Titanium Hindle exhaust can and stainless exhaust system
new battery (spring 2012)
EM Pro wiring harness and ECU
Performance Friction brake pads, Steel braided brake lines
Ohlins rear shock, with fresh fork rebuild March 2013
Vortex rearsets
Brembo master cylinder and lever, and brake fluid recently flushed
Hyperpro steering damper
Stomp grips, Frame savers
Dynojet quick shifter for clutchless upshifts
Attack triple clamps
Adjustable swingarm mounts
Graves clip-on bars
Sharkskinz bodywork with complete spare set
Quick pin safety wiring for quicker wheel changes
520 chain and sprockets
BMC racing air filter – cleaned and oiled March 2013
Front and rear race stands
FOLLOWING SPARES INCLUDED with the 2006 GSXR1000
Shop Manual
Frame savers
44T sprocket (on bike)
Stock windscreen (fits race bodywork)
Complete set spare bodywork with great paint (upper, lower, tail, draft piece under tail)
2 aluminum fairing brackets (1 needs repair)
Vortex fairing bracket (new)
Fuel tank pivot hardware
20” Hindle slipon muffler
3 oval muffler straps
Front half of instrument panel
Aluminum velocity stacks for tuning
Spare kill switch (cracked but works)
R handlebar (stock)
Kill switch ass’y
Throttle grip, tube, cables
2 spare clutch levers
Oil cooler
Stock lower triple clamp
Plastic chain guards
Front axle and bolt
Swingarm pivot axle and hardware
Rear brake master cylinder assembly (stock)
Rear brake caliper assembly (complete)
Rear brake pads (used but lots left)
Stock front sprocket 17T 530
56 link DID chain 520 ERV3
Engine components:
16 valve springs (new) 12921-02H01
Assorted bolts – 2 plastic boxes (small and large)
4 spark plugs NGK IR CR9EIA 9
Suspension
1.0 Fork springs (Note: currently 1.10 kg/mm springs in forks (Spring 2013))
Old set of forks for spare parts (at least one tube is bent)
Ohlins rear shock springs 01091-26/85 L123
01091-34/100 L228
Note: 110 spring is currently in the bike
(spare set of wheels with brake disks available for additional $600)
For more information e-mail me at [email protected] or call 403.615.0209
You won't find another machine in this good of condition with this many spares, ready to ride, for this low of a price! There are no problems with this bike - it is ready to ride NOW. Contact me for pictures or more info, and details are below. This is the bike that Brad Gavey dubbed "the Millenium Falcon". Funny but true - still the fastest ship in the galaxy!
Former Clint McBain factory Suzuki race bike, No street bodywork – track bike only.
180 HP Engine by Vass Performance – 7-9 hours track use since engine re-build, includes World Superbike cams, aluminum engine sidecovers.
Brand new Titanium Hindle exhaust can and stainless exhaust system
new battery (spring 2012)
EM Pro wiring harness and ECU
Performance Friction brake pads, Steel braided brake lines
Ohlins rear shock, with fresh fork rebuild March 2013
Vortex rearsets
Brembo master cylinder and lever, and brake fluid recently flushed
Hyperpro steering damper
Stomp grips, Frame savers
Dynojet quick shifter for clutchless upshifts
Attack triple clamps
Adjustable swingarm mounts
Graves clip-on bars
Sharkskinz bodywork with complete spare set
Quick pin safety wiring for quicker wheel changes
520 chain and sprockets
BMC racing air filter – cleaned and oiled March 2013
Front and rear race stands
FOLLOWING SPARES INCLUDED with the 2006 GSXR1000
Shop Manual
Frame savers
44T sprocket (on bike)
Stock windscreen (fits race bodywork)
Complete set spare bodywork with great paint (upper, lower, tail, draft piece under tail)
2 aluminum fairing brackets (1 needs repair)
Vortex fairing bracket (new)
Fuel tank pivot hardware
20” Hindle slipon muffler
3 oval muffler straps
Front half of instrument panel
Aluminum velocity stacks for tuning
Spare kill switch (cracked but works)
R handlebar (stock)
Kill switch ass’y
Throttle grip, tube, cables
2 spare clutch levers
Oil cooler
Stock lower triple clamp
Plastic chain guards
Front axle and bolt
Swingarm pivot axle and hardware
Rear brake master cylinder assembly (stock)
Rear brake caliper assembly (complete)
Rear brake pads (used but lots left)
Stock front sprocket 17T 530
56 link DID chain 520 ERV3
Engine components:
16 valve springs (new) 12921-02H01
Assorted bolts – 2 plastic boxes (small and large)
4 spark plugs NGK IR CR9EIA 9
Suspension
1.0 Fork springs (Note: currently 1.10 kg/mm springs in forks (Spring 2013))
Old set of forks for spare parts (at least one tube is bent)
Ohlins rear shock springs 01091-26/85 L123
01091-34/100 L228
Note: 110 spring is currently in the bike
