Paul Macdonell
Member
*Clean Title* $7500
https://www.kijiji.ca/v-view-details.html?adId=1419739698&siteLocale=en_CA
Thinking about selling to upgrade. Race/track ready bike plus all spare parts I have.
Engine: • 07 motor build to 08+ supersport YEC spec (YEC rod bearings, YEC oil pump, decked head, ape cam sprockets, smog block off plates, ported and valves done) built by Willie Vass in 2016 making 124 hp on VP MR12 and 120 on 91+ pump to the rear wheel • 06 Superstock motor making 119 hp on MR12 and 115 hp on 91+ pump to the rear wheel tuned by Willie Vass • Ape manual cam chain tensioner on both engines • Woodcraft case covers • Modified clutch for more slip which equals better engine braking and corner entry • Full Hindle stainless exhaust with titanium muffler (includes slider on muffler) • Graves velocity stacks $$$$ • K&N air filter Chassis • 30mm Ohlins front forks set up by Willie Vass • Penske rear shock with remote compression adjuster set up by Willie Vass • Ohlins 68mm steering damper revalved for racing with Graves mount • Motoholder Subframe Braking • Brembo T-Drive 320mm rotors (on one set of rims) with 5mm caliper spacers) • Galfer 1300 series pads • Accossato 18x20 master cylinder with remote adjuster • SBK rear brake reservoir • Stainless steel brake lines front and rear • Lightweight rear rotors
Drive: • ERV3 DID racing chain • Vortex front sprockets 15,16 tooth • Vortex rear sprockets 42-48 tooth • 3 sets of stock wheels Controls: • Vortex clip-ons • Vortex clutch lever • Vortex rear sets • Dion Device brake lever guard • Motion Pro 2 quick turn throttle with different throttle cams • Vortex swingarm spools • Vortex Fuel cap • Stompgrip tank grip Crash protection: • Graves diamond cut frame sliders (sit underneath bodywork to stop bike from cartwheeling, best I have ever used) • Woodcraft sharkfin • Bickle tank sliders Body: • 2.5 sets of Hotbodies bodywork • Zero gravity windscreens x2 • Hotbodies windscreens x2 Electrical: • Flashtune ECU with US Spec wiring harness (no immobilizer) o Making a true 1-1 throttle o Advance engine braking o Reduced engine braking • Bazzaz Fuel controller with handlebar mapswitch (2 maps MR12 & 91+pump) • Bazzaz auto tune • Keyless ignition
The bike will come fully safety wired for racing and comes with the following spares • 06-07 dash (damaged lens) • 06-07 triple tree (bike currently has 08+) • 2 extra airbox covers (damaged but still usable) • 2 extra gas tanks (damaged but no leaks) • 2 spare used clutchs still within spec • Various vortex rear set parts • Stock subfame broken but still very much usable • Extra clips ons • Extra brake reservoirs • Shock springs • extra brand new fairing stays
https://www.kijiji.ca/v-view-details.html?adId=1419739698&siteLocale=en_CA
Thinking about selling to upgrade. Race/track ready bike plus all spare parts I have.
Engine: • 07 motor build to 08+ supersport YEC spec (YEC rod bearings, YEC oil pump, decked head, ape cam sprockets, smog block off plates, ported and valves done) built by Willie Vass in 2016 making 124 hp on VP MR12 and 120 on 91+ pump to the rear wheel • 06 Superstock motor making 119 hp on MR12 and 115 hp on 91+ pump to the rear wheel tuned by Willie Vass • Ape manual cam chain tensioner on both engines • Woodcraft case covers • Modified clutch for more slip which equals better engine braking and corner entry • Full Hindle stainless exhaust with titanium muffler (includes slider on muffler) • Graves velocity stacks $$$$ • K&N air filter Chassis • 30mm Ohlins front forks set up by Willie Vass • Penske rear shock with remote compression adjuster set up by Willie Vass • Ohlins 68mm steering damper revalved for racing with Graves mount • Motoholder Subframe Braking • Brembo T-Drive 320mm rotors (on one set of rims) with 5mm caliper spacers) • Galfer 1300 series pads • Accossato 18x20 master cylinder with remote adjuster • SBK rear brake reservoir • Stainless steel brake lines front and rear • Lightweight rear rotors
Drive: • ERV3 DID racing chain • Vortex front sprockets 15,16 tooth • Vortex rear sprockets 42-48 tooth • 3 sets of stock wheels Controls: • Vortex clip-ons • Vortex clutch lever • Vortex rear sets • Dion Device brake lever guard • Motion Pro 2 quick turn throttle with different throttle cams • Vortex swingarm spools • Vortex Fuel cap • Stompgrip tank grip Crash protection: • Graves diamond cut frame sliders (sit underneath bodywork to stop bike from cartwheeling, best I have ever used) • Woodcraft sharkfin • Bickle tank sliders Body: • 2.5 sets of Hotbodies bodywork • Zero gravity windscreens x2 • Hotbodies windscreens x2 Electrical: • Flashtune ECU with US Spec wiring harness (no immobilizer) o Making a true 1-1 throttle o Advance engine braking o Reduced engine braking • Bazzaz Fuel controller with handlebar mapswitch (2 maps MR12 & 91+pump) • Bazzaz auto tune • Keyless ignition
The bike will come fully safety wired for racing and comes with the following spares • 06-07 dash (damaged lens) • 06-07 triple tree (bike currently has 08+) • 2 extra airbox covers (damaged but still usable) • 2 extra gas tanks (damaged but no leaks) • 2 spare used clutchs still within spec • Various vortex rear set parts • Stock subfame broken but still very much usable • Extra clips ons • Extra brake reservoirs • Shock springs • extra brand new fairing stays
Last edited: