For sale:
2006 CRF250R
This is an excellent bike that has been barely used and meticulously maintained. This is my personal play bike that I haven't used in 5 years...coincidentally I have a five year old...go figure.
-7.7 hours on engine (hour meter installed) fresh engine and transmission oils. Engine oil changed every ride
-Web camshaft
-Manual camshaft chain tensioner
-Twin air filter just serviced
-CHM full exhaust
-SFB billet clutch cover
-Boyesen high flow water pump cover and impeller
-Works Connection engine guard
-Sunline aluminum shift lever
-IMS pro pegs
-Sunline radiator guards
-Works Connection skid plate
-Excel black billet hubs, Excel gold rims with oversized spokes front and rear
-Tag top triple clamp, inch and an eighth T2 handle bars with two bar pads
-Sunline folding clutch lever and pro perch with adjuster
-Sunline pro brake perch with hot start re-locater and master cylinder cooler
-Factory Pro jet kit with titanium needle installed and tuned
-New o-ring chain and steel sprockets for extended life over stock components
-New tires front and back
-Front suspension just serviced, new seals and oil. New Factory Connection springs for a 180 pound rider. Low boy bleeders and seal savers installed
-Rear shock just serviced, new seals and oil. New Factory Connection spring for a 180 pound rider. All aluminum parts anodized for the factory look
-Linkage and swing arm pivot just serviced
-Steering head just serviced
As you can see this bike has been well taken care of.
$3600
2006 CRF250R
This is an excellent bike that has been barely used and meticulously maintained. This is my personal play bike that I haven't used in 5 years...coincidentally I have a five year old...go figure.
-7.7 hours on engine (hour meter installed) fresh engine and transmission oils. Engine oil changed every ride
-Web camshaft
-Manual camshaft chain tensioner
-Twin air filter just serviced
-CHM full exhaust
-SFB billet clutch cover
-Boyesen high flow water pump cover and impeller
-Works Connection engine guard
-Sunline aluminum shift lever
-IMS pro pegs
-Sunline radiator guards
-Works Connection skid plate
-Excel black billet hubs, Excel gold rims with oversized spokes front and rear
-Tag top triple clamp, inch and an eighth T2 handle bars with two bar pads
-Sunline folding clutch lever and pro perch with adjuster
-Sunline pro brake perch with hot start re-locater and master cylinder cooler
-Factory Pro jet kit with titanium needle installed and tuned
-New o-ring chain and steel sprockets for extended life over stock components
-New tires front and back
-Front suspension just serviced, new seals and oil. New Factory Connection springs for a 180 pound rider. Low boy bleeders and seal savers installed
-Rear shock just serviced, new seals and oil. New Factory Connection spring for a 180 pound rider. All aluminum parts anodized for the factory look
-Linkage and swing arm pivot just serviced
-Steering head just serviced
As you can see this bike has been well taken care of.
$3600
