FS: 2007+ CBR 600RR parts

hubley

hubley

Member
Like the title says parts from a 2007 CBR 600RR.


Spare parts:
- Clean title frame (needs rearset mounts welded otherwise straight) - Sold
- Front and rear wheels and roaters, 50 lap SBK slick mounted - $400
- Swing arm -$50
- Subframe (been crashed but would make a good backup) - $50
- Triple tree setup - $100
- Cush drive - $20
- Rear sprockets 47, 49 and 44 - $30 each
- Front sprockets 14 and 15 - $10 each
- OEM stator cover (rashed no holes) - $40
- OEM master cylinder - Sold
- OEM rear brake setup, master and caliper - $50
- Vortex clipon bar - Sold
- Stock brake lever - $20
- Hel braided lines (some wear but still fully functional) - Sold
- OEM shock - $50
- 2 OEM rad fans - $15 each
- OEM rearsets - $70
- Woodcraft brake lever guard (rashed but new slider piece) - $60
- OEM radiator overflow bottle - $15
- 2 DID ERV3 520 master links - $15 for both
- OEM Front seat - $50
- OEM clipon right - $40
- K&N Filter Recharge kit (unopened) - $10

Pics can be provided if interested, just let me know. Parts are in Calgary, prices don’t include shipping.


Email: [email protected]
Call or text: 403.831.1696
 
Last edited:
hubley

hubley

Member
The frame is from my 2007 that I bought new. I converted the bike to a race bike in 2009 (last year registered). The frame is straight however the shifter side rearset mounts need to be welded as they were cracked during a low-speed lowside (thanks Vortex rearsets). I had a spare frame so rather than have them welded I just did the swap over the winter.

Pics below of the frame and the documentation. $1200 + shipping from Calgary, AB Canada.
















 
You must log in or register to reply here.
Top