Wasn't sure where to post this, move if necessary. Thanks.
RONIN MOTORCYCLE WORKS INC. (Ronin) currently located at #2 – 20B Sylvaire Close, Sylvan Lake, Alberta. T4S 2H6 has the following equipment for immediate sale:
1)
LATHE: Heavy duty – medium sized Colchester Bantam 600 11/33 engine lathe, Made in England.
• 3hp 3 phase, 16 speeds, power feed with a 1” spindle bore
• MT3 tail stock taper
• Complete with all thread cutting change gears and original stand
• Lathe has a quick change tool post and four holders; complete with
KENNEMETAL CUTTERS with inserts
• One OD grooving/treading cutter
• One general turning cutter,
• One 1” boring bar and one ½” boring bar
• Internal grooving/threading bar; and
PARTING TOOL with two blades
• One 1mm and one 1.5 mm
• Two live centers
• Two drill chucks
The lathe with the Kennemetal Cutters and Parting Tool is offered at $5,500 plus GST where applicable.
2)
LINCOLN 185 Tig/Stick Welder. The welder is complete with TIG torch, foot pedal, stick whip, regulator, cart and many tungsten, torch pieces, and filler metal for both steel and aluminum.
The welder is offered at $2,500 plus GST where applicable.
3)
ITALIAN MADE PEG ORBITAL VALVE SEAT GRINDER. The seat grinder is complete with 59 stone of varying grit and sizes, 16 valve guide pilots to fit all motorcycle engines, billet aluminum levelling bar, adjustment and levelling tools. A hard case and manual are also included.
The seat grinder is offered at $4,750 plus GST where applicable.
Please call Doug Clavier at 403-884-2774 or e-mail him at [email protected] for further information.
RONIN MOTORCYCLE WORKS INC. (Ronin) currently located at #2 – 20B Sylvaire Close, Sylvan Lake, Alberta. T4S 2H6 has the following equipment for immediate sale:
1)
LATHE: Heavy duty – medium sized Colchester Bantam 600 11/33 engine lathe, Made in England.
• 3hp 3 phase, 16 speeds, power feed with a 1” spindle bore
• MT3 tail stock taper
• Complete with all thread cutting change gears and original stand
• Lathe has a quick change tool post and four holders; complete with
KENNEMETAL CUTTERS with inserts
• One OD grooving/treading cutter
• One general turning cutter,
• One 1” boring bar and one ½” boring bar
• Internal grooving/threading bar; and
PARTING TOOL with two blades
• One 1mm and one 1.5 mm
• Two live centers
• Two drill chucks
The lathe with the Kennemetal Cutters and Parting Tool is offered at $5,500 plus GST where applicable.
2)
LINCOLN 185 Tig/Stick Welder. The welder is complete with TIG torch, foot pedal, stick whip, regulator, cart and many tungsten, torch pieces, and filler metal for both steel and aluminum.
The welder is offered at $2,500 plus GST where applicable.
3)
ITALIAN MADE PEG ORBITAL VALVE SEAT GRINDER. The seat grinder is complete with 59 stone of varying grit and sizes, 16 valve guide pilots to fit all motorcycle engines, billet aluminum levelling bar, adjustment and levelling tools. A hard case and manual are also included.
The seat grinder is offered at $4,750 plus GST where applicable.
Please call Doug Clavier at 403-884-2774 or e-mail him at [email protected] for further information.